1. Prepare a USB drive, the file system of the USB drive needs to be formatted in FAT32 format, and the capacity of the USB drive needs to be greater than 1GB.
2. Copy attached SeekerPack file in the first level directory of the USB drive.
3. Ensure that the mower is turned on and stable. When the LED panel of the mower shows "idle", it can indicate that the machine is turned on and running stably.
4. Remove the battery pack cover and see the USB interface
5. Insert the USB drive into the mower's USB interface
6. If the machine can recognize the USB drive normally, the light in front of the machine will display orange yellow, indicating that the machine is downloading log.If the camera light turns on for 1 second and then goes off, it also indicates that the USB drive is recognized normally.
7. If the downloading is successful, the front headlights of the machine will turn green. Or when you see the camera light continuously flashing slowly, it also indicates a successful downloading.
8. Send us the file record0 in the SeekerLog file for further analysis